Document No: 9961 Revision: F Issue Date: Jan-29-2018 Page 9 of 35
This document and all copies are the property of Spider
®
. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
Failure of the electrical supply may delay travel of the platform.
Control system failure can cause unwanted/unexpected movement of the platform.
Improper power supply (voltage or frequency) may damage the hoist.
All electrical connections must be locked and supported by strain relief devices.
Make sure the electrical cord and wire rope are long enough to allow full travel of the suspended
equipment.
the immediate health of an operator and may pose serious risks to the hoist and other equipment
being used.
Use protective gloves to handle the steel wire ropes.
Use only Spider
®
-approved steel wire rope.
Steel wires ropes must be replaced under any of the following conditions:
Kinking (see below), crushing (see below), bird-caging (see below) or any other
distortion of the wire rope structure.
To Next Page
Loading...