Document No: 9961 Revision: F Issue Date: Jan-29-2018 Page 33 of 35
This document and all copies are the property of Spider
®
. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
wind speeds must be considered.
are to be installed and used in accordance with the
manufacturer’s recommended procedures.
unless proper precautions are taken. Contact the power service provider for advice.
when working near unguarded edges.
if you
are sick or impaired in any way.
or drugs.
when rigging near unguarded edges.
must be capable of supporting the hoist rated load with a safety factor of 4.
must be secured from unwanted movement in any direction.
must be secured to the beam to prevent accidental displacement.
must be installed and secured
to the roof structure with bolts or other direct connections. Direct connections shall be evaluated by a
competent person.
Tieback shall be equivalent in strength to
the suspension ropes.
and secure them
without slack, to a suitable anchor capable of supporting the hoist rated load with a safety factor of 4.
two tiebacks
at opposing angles must be used to prevent movement.
to
prevent movement or side loading.
Always use gloves.
To Next Page
Loading...