Page 34 of 35 Document No: 9961 Revision: F Issue Date: Jan-29-2018
This document and all copies are the property of Spider
®
. All dimensions and data are indicative only.
The user must ensure that the equipment complies with local rules and regulations.
in accordance with manufacturer’s instructions in order to avoid
kinking or damage.
to reach to the lowest possible landing.
in accordance with the wire rope manufacturer’s instructions.
electricity, chemicals or damage.
Follow hoist
manufacturer’s recommendations.
in accordance with the manufacturer’s instructions.
Protect them with circuit breakers.
for the application.
to prevent separation.
to prevent them from separation.
must be attached to an
independent fall arrest system.
to a separate anchorage capable of supporting a minimum of
unless lifelines are protected
and a suitable anchorage connection is used.
to minimize free fall.
that are compatible with the rope grab.
Rope grab must be properly oriented.
To Next Page
Loading...