Splicecom PCS 571 - Transfer a Call Via the Directory

PCS 571/572 User Manual
Contacts Directory
PCS 571/572 User Manual v3.2/0913/1 25
3
Press the context sensitive key beside the contact you wish to call
4
The list of numbers stored for this contact will be displayed.
3
Press the context sensitive key beside the number you wish to dial. The call will be made
automatically.
Transfer a call via the Directory
1
Place the call on hold by pressing the Recall button
2
Press the Contacts button to access the directory
3
Use the Search facility to find the contact required
4
Press the context sensitive key beside the contact you wish to call.
5
The list of numbers stored for this contact will be displayed.
6
Press the context sensitive key beside the number you wish to dial. The call will be made
automatically.
7
Wait for the call to be answered and announce the call
8
Transfer the call by replacing your handset or by pressing the Speaker button. You will no
longer have control of the call.
If at any time during this process you wish to return to your original caller press the Recall button.
Alternatively, this method will allow you to continue talking to the caller while searching the directory for
the contact you require.
1
Press the Contacts button to access the directory
2
Use the Search facility to find the contact required
3
Press the context sensitive key beside the contact you wish to call.
4
The list of numbers stored for this contact will be displayed.
5
Press the context sensitive key beside the number you wish to dial.
6
Your original call will be put on hold and the new call will be made.