Introduction Waukesha Cherry-Burrell
Page 14 95-03009 10/2010
Elastomers
EPDM (FDA approved)
Silicone (FDA approved)
Teflon Encapsulated (FDA approved)
FFKM
Finishes/Product Contact Surfaces
25RA
20RA
Electropolish
Unpolished - Industrial
Leg Kit
See “Motor Mounts” on page 70.
Base Mounting
Footless C-face motors
Footed C-face motors
T-Frame motors
NOTE: T
-Frame motors can be configured with or without bases,
couplings
or coupling covers.
Pedestal Mounted
Two types on stands; see “Base Mount Components” on page 9.
Motors
NEMA JM (standard) totally enclosed fan cooled (TEFC) for close-
co
up
led pumps
1750 or 3500 RPM single phase 115/230 volt and 3 phase 230/460
volt
Optional Enclosures
Washdown
Explosion proof
Severe Duty/Chemical Duty
Operating Parameters Nominal Capacity
Up to 1150 U.S. GPM (260 Cubic Meters/Hr.)
Viscosity
Up to 1500 CPS
Differential Pressure
UP to 340 Feet (100 Meters)
Temperature
Up to 450°F (230°C)
Nominal Speeds
1450 or 2900 RPM - 50HZ
1750 or 3500 RPM - 60HZ
To Next Page
Loading...
Need help?
General
