Waukesha Cherry-Burrell Maintenance
10/2010 95-03009 Page 47
Servicing the Electric
Motor
See the motor manufacturer’s instructions for specific service information.
General Service Information
Inspect units at regular intervals.
Keep units clean and ventilation openings clear of dust, dirt or other
debris.
C
AUTION:
Do not over-grease.
Excessive lubrication may dam-
age the unit.
Lubricate the units per the manufacturer’s instructions and the instruction
plate on the unit.
Motor Lubrication Instructions
Some small motors have sealed-for-life bearings which require no lubrica-
tion.
WARNING:
Disconnect all power
sources to the unit and discharge
all parts which may retain an
electrica
l charge before
attempting any maintenance or
repair. Screens and covers must
be maintained in place when the
unit is in operation.
Greasable bearings are shipped with a hi
gh-quality, wide-temperature-
range grease in the bearings.
Some motors can be greased. Refer to the motor manufacturer’s instruc-
tions for more information regarding lubrication pr
ocedures and additional
service procedures.
To Next Page
Loading...
Need help?
General
