SRC RANGER 4000 S - Configuring for a Rain Sensor

RangerSInstallationandtroubleshooting
19
Thefollowingprocedurewalksyouthroughconfiguringthecontrollerfor
rainsensorinput‐itisidenticaltopartsoftheprocedureforET.
ConfiguringforaRainSensor
1 Beforemovingon,makesureyouhaveconnectedtherainsensor.
FormoreinformationrefertotheseparateInstallationand
Troubleshootingmanual.
2 Turnthedialto SETUP SENSORS :
Now the display looks like this:
Note:Inamaster/slavesetupyoudonotneedarainsensor
connectedtoallslaves‐themastercansimplysendoutalarms
toallslavesinstead.