Appendix E Safety instructions
E.1 Safety instructions
• The STM32MP157x-EV1 Evaluation board is designed to be powered from the 5 V DC power supply unit
provided in the package. The power supply acting as a disconnection device must remain easily accessible
in case of issue.
• Marking observed on the power supply unit:
Marking for Class II product. Such product does not require a safety connection to electrical earth.
For indoor use only.
This marking indicates that the product operates with an alternating current (AC) source (mains). It is
completed by afferent values (voltage, frequency and max current).
This marking indicates that the terminal is suitable for direct current (DC) only. It is completed by afferent
values (voltage and max current).
The associated symbol means that WEEE and waste batteries must not be thrown away but collected
separately and recycled.
• Do not expose it to heat from any source.
• Do not expose it to water, moisture or place on a conductive surface while in operation.
UM2648
Safety instructions
UM2648 - Rev 1
page 52/61
To Next Page
Loading...
Need help?
General
