2. Check that display shows:
XXX
3 0
Elevation
Feedback~
tWM
'-speed
3. Press and releaseD
INCLINE
repeatedly until ElevationFeedback
is
between57 and 240.
Caution: Do not adjust the voltage below the lowest allowable ELMAX=57 (1.12 volts) or above
the highest allowable ELZERO=240 (4.71 volts),
as
safety features are turned
off
in Motor Test
Mode, and mechanical damage may ensue.
4. Press
ISTOJ:JI
Key. Treadmill may now be operational. Call Star Trac
if
additional assistance is
needed.
70
§TAR
TRAC
45DO
TREADMILL
Owner'.
Manual
To Next Page
Loading...
