HEART
RATE
TE§T
MODE
Heart Rate Test Mode allows you
to
test the heart rate calculation and display capability
of
the
treadmill
if
it is equipped with contact rings or Polar wireless heart rate chest strap reception
capability.
To
enter Heart Rate Test Mode:
• Enter Manager Settings (or Maintenance Settings), then Display
Test Mode:
• Press and
hold[!],
fi)),
and
lSTARTI
together (or
O'
D,
and
[STARTI
together).
• Release
()J (or
B)·
• Listen for a beep and see SETTINGS (or CONFIGURE) in the display momentarily.
• Release the remaining keys. See UNITS in the Alphanumeric Display.
• Press and release
0.
• See that all LEDs are lit.
• Press and release
0.
• See that all LEDs are dark. See the EPROM version, e.g. PWM V3.3, in the Alphanumeric
Display.
• Press any key to obtain a blank display.
• Press and release
C.
• See SEEKING HR in the Alphanumeric Display.
• Grasp the stainless steel contact rings or place the Polar wireless heart rate chest strap around
your chest.
• See average heart rate in the Alphanumeric Display.
To
leave Heart Rate Test Mode and enter Operating Mode, press and release
[STDJ:l).
liB
!!iTAR
TRAC
4500
TREADMILL
Owner's
Manual
To Next Page
Loading...
