Starkey SurfLink - Page 22

the microphone) while reducing sound levels from other
directions. This directional microphone setting is useful
for listening to a single speaker when background noise
is present.
Note: After selecting this button, a prompt will remind you to
point SurfLink Mobile 2 microphone toward sounds you want to
hear. In noisy environments, move SurfLink Mobile 2 as close as
possible to sound source.
Line-In button – Receives audio from Line-In
cable inserted into micro-USB jack of SurfLink
Mobile 2.
Bluetooth Streaming Input button – Receives
audio from a connected Bluetooth device.
Note: For this button to be available, the Bluetooth
antenna must be On, the Bluetooth device needs to be actively
connected with SurfLink Mobile 2, and Bluetooth device needs to
be powered on and within range of SurfLink Mobile 2.
(3) Use the side buttons to adjust the
stream level (audio resolution) to 75%
or higher.
(4) Select the Remote icon (lower left)
to go to Remote screen to make
hearing aid adjustments.
Note: Decreasing the volume makes both the hearing aid
microphone input and streamed audio input sound quieter.
Line-In
mp3 Player
22
Operation