Getting Started
Getting Started
Power Button
To turn SurfLink Mobile 2 On, press and hold the
Power button. Release the button when the display
powers on.
When SurfLink Mobile 2 is on, you can put it into Sleep
Mode by a short press and release of the Power button.
In Sleep Mode, SurfLink Mobile 2 is still on, but the
display is turned off. SurfLink Mobile 2 will automatically
enter Sleep Mode to conserve power when no Touch
Screen input is received for the confi gured time.
To wake the display, press and release the Power
button, then select the Push to Unlock button on
the Touch Screen.
To turn SurfLink Mobile 2 Off, press and hold the
Power button (typically 5 - 15 seconds). Release
the button when the “Powering Down” message
is displayed.
Touch Screen Display
SurfLink Mobile 2 incorporates a full-color display with
a Touch Screen. Press and release the Touch Screen
buttons to make selections.
11
To Next Page
Loading...
