The clip and lanyard accessories allow the SurfLink
Mobile 2 to be worn for hands-free use. The Base
Clip attaches directly to SurfLink Mobile 2. The Base
Clip attaches to either the neck-worn Lanyard or
Belt Clip.
Base Clip Front/Back Lanyard Attachment Belt Clip Attachment
Slide the desired attachment option
(Lanyard or Belt Clip) onto the Base
Clip, and then attach the Base Clip
to SurfLink Mobile 2 by orientating
the clip according to the shadowed
outline of the Base Clip on the back
of the SurfLink Mobile 2 (Figure 4).
To interchange attachments,
remove the Base Clip from SurfLink
Mobile 2, then press down on
the release tab (Figure 5) of the
Base Clip to unlock and slide the
attachment out of position toward
the center of the Base Clip
Fig. 4
Fig. 5
41
Additional Info
To Next Page
Loading...
