Starline S96v2 - Configuration Menu

Activate sound profile 2
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-1.png
Image not found or type unknown
Activate sound profile 1
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-2.png
Image not found or type unknown
Activate sound profile 0
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-3.png
Image not found or type unknown
Activate sound profile --
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-4.png
Image not found or type unknown
Activate Flexible logic program
icon-short-3.png
Image not found or type unknown
icon-short-3.png
Image not found or type unknown
Configuration menu
Some functions of the security system are controlled through a configuration menu: control of the
"Hands-Free" mode, service mode, setting the automatic engine start.
Entering and exiting the menu is done by long-pressing button 4:
icon-long-4.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
. If no buttons on the remote key are pressed within 15 seconds, there will be
an automatic exit from the menu. When entering the menu, the cursor will be set to the first icon.
Transition to the next and previous menu items is done by short pressing buttons
icon-short-1.png
Image not found or type unknown
or
icon-short-4.png
Image not found or type unknown
, respectively.
Selecting a function is done by short pressing buttons 2 and 3:
icon-short-double-2-3.png
Image not found or type unknown
.
Changing the parameter value is done by short pressing buttons
icon-short-2.png
Image not found or type unknown
or
icon-short-3.png
Image not found or type unknown
(decrease and increase, respectively). Holding the button for a long time
increases the speed of changing the parameter value.
Transitions between menu items, changing parameters, and exiting the menu will be confirmed by
a melodic sound signal.
Descriptions and management of settings are provided in the table.
Icon Parameter Description Setting Step
Режим «Свободные руки».png
Image not found or type unknown
"Hands-Free" mode Enable/disable "Hands-
Free" mode
—