User manual
Controlling the System using
a Wireless Tag
(Transponder)
Appearance
metla_new.png
Image not found or type unknown
Checking Connection
To check the connection between the tag and the main unit, briefly press the tag button. If the
connection is established, the tag’s LED will flash twice; if not, it will flash once. The color of the
flash corresponds to the set mode:
Green — "anti-hijack by tag loss" mode is off.
Red — "anti-hijack by tag loss" mode is on.
Yellow — service mode.
System Control
Press durations for the tag button:
Additional Bluetooth remote tags (hereafter referred to as the tag), included in the package,
are initially in transport mode, in which they are disabled. Pressing the tag button in this
mode will be indicated by green, red, and yellow flashes of the built-in LED.
Before use, press the tag button several times until the flash color changes to green.
The availability of the tag depends on the delivery set.
To Next Page
Loading...
