Starline S96v2 - Automatic Mode

In the manual mode the parking preheater is switched on/off by a command.
The parking preheater can be switched on by one of following methods:
Sequentially pressing buttons 2 and 1 on the remote key:
icon-long-2.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-1.png
Image not found or type unknown
;
by SMS-command 221 ;
Via the StarLine mobile app;
Through the personal account on thestarline.onlinewebsite.
Operation can be prolonged by sending a repeated command for parking preheater switch-on.
The parking preheater can be switched off by one of following methods:
Sequentially pressing button 2 on the remote key:
icon-long-2.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-2.png
Image not found or type unknown
;
by SMS command 220 ;
Via the StarLine mobile app;
Through the personal account on thestarline.onlinewebsite.
Automatic mode
In automatic mode, the preheater is activated before remote and/or automatic engine start.
Automatic engine start can occur under the following conditions:
Based on temperature value — preheater starts when the engine temperature drops
below a set value.
Based on the alarm clock — preheater starts at a specified time.
The preheater operates for 20 minutes in this mode. To change its duration, consult your
installation specialist.
If the preheater has factory settings different from those set by the installation specialist,
the operating time may differ from the specified time.
To protect the engine from overheating, the preheater will stop when the maximum
temperature threshold specified during the security system setup is reached. This helps
protect the engine from overheating.
The automatic mode is activated by the installation specialist during complex setting after
mounting.