Shock sensor
Tilt sensor
Motion sensor
Auxiliary sensor
If any of these zones are breached, the system will switch to "Alarm" mode.
Arming can be activated in one of the following ways:
Short press on button
icon-short-1.png
Image not found or type unknown
of the remote key;
SMS command 11 ;
Voice menu command 11;
Via the StarLine mobile app;
Through the personal account on the starline.onlinewebsite;
By activating the standard security system ("Slave" mode);
When the tag is lost or the door handle sensor is touched in "Hands-Free" mode
By pressing the tag button once in "Disarmed" or "Alarm" mode
Successful arming will be confirmed by 1 sound signal and 1 light signal.
Silent Arming
Silent arming, which does not use sound signals (siren), can be performed in one of the following
ways:
Triple press on button
icon-short-1.png
Image not found or type unknown
of the remote key;
SMS command 111 ;
Voice menu command 111 ;
Via the StarLine mobile app;
Through the personal account on thestarline.onlinewebsite.
Successful arming will be confirmed by 1 light signal.
Arming is only possible with the ignition off. If the arming command is sent while the ignition
is on, only the central lock will be activated.
If the doors, hood, or trunk are not properly closed, or if any of the door, hood, or trunk
switches are faulty (permanently closed), the system will warn you with 4 sound signals and
4 light signals. Restore the breached security zone and check for a single confirming signal
indicating entry into the armed mode.
If the doors, hood, or trunk are not properly closed, or if any of the door, hood, or trunk
switches are faulty (permanently closed), the system will warn you with 4 light signals.
To Next Page
Loading...
