User manual
Light and sound indication
The security system provides various options for indicating modes such as "Disarmed", "Armed",
and "Alarm":
Hidden: Light and sound indicators are disabled.
Silent: Only light indicators are enabled.
Sound: Only sound indicators are enabled.
Full: Both light and sound indicators are enabled.
Indicator table
The security complex informs about its status by means of sound (horn) and light signals (turn
signals):
icon-short.png
Image not found or type unknown
— short signal;
icon-long.png
Image not found or type unknown
— long signal.
Event Light signals Horn
Arming
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
Arming with security zone breach
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
Arming with deactivation of «Hands
free»
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-long.png
Image not found or type unknown
Arming with deactivation of «Hands
free» mode with security zone breach
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-long.png
Image not found or type unknown
Disarming
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
The default setting includes sound notifications with sirens and emergency light signals. The
indicator mode is configured by the installation specialist during complex setup.
To Next Page
Loading...
