User manual
GSM control commands
Controlling the system via voice menu and SMS commands is done from the owner's phone (M1)
and the numbers stored in the system memory (M2, M3, M4).
The phone number that first calls the system will automatically be stored as the primary owner's
number. Commands from this number are sent without a GSM password. The GSM password is set
from the primary owner's number during the first call. Also, this number configures management
rights for phones M2, M3, M4.
To send commands from other numbers (guest numbers), you need to enter the password at the
beginning of the command text.
For example, to arm the system, send the following SMS message: 1234 11 ,
where 1234 — GSM password;
11 — command number.
Notification Settings
The system provides notifications via phone calls and SMS messages for various events (alarm
activation, SIM card balance decrease, battery discharge, etc.).
Notification settings can be adjusted in the personal account on the website starline.online
(Settings → Telematics → Notification Settings/Additional Notifications via SMS).
Voice menu commands
Command Command meaning М1 (owner's
phone)
Phones М2, М3, М4 Guest number
If the password is entered incorrectly twice from a guest number, command execution from
that number will be blocked for 1 hour, and a corresponding message will be sent to the
owner's number.
To Next Page
Loading...
