Holding down the tag button for 5 seconds;
By SMS command 50 ;
By voice menu command 50 ;
Via the StarLine mobile app;
Through the personal account on thestarline.onlinewebsite.
By entering the emergency disarm code.
Entering Service Mode will be confirmed by a yellow LED indication on the tag.
Automatic Exit from Service Mode
The system will automatically exit Service Mode and wait for owner authorization when leaving the
service station based on the established event with the ignition on. After successful authorization,
the system will switch to the "Disarmed" mode.
If authorization fails, the security system will switch to the "Alarm" mode.
Immobilizer mode
The Immobilizer Mode prevents movement without additional owner authorization.
Upon disarming or turning off the ignition, the system will wait for authorization confirmation either
by the presence of the key fob in the vicinity or by entering the owner's authorization code using
the vehicle's standard buttons (e.g., multimedia or window control buttons) while the ignition is on.
If owner authorization is not confirmed within 1 minute, attempting to start the engine will result in
it being locked for 1 minute or until the owner's authorization is successfully completed.
Vehicle Status Control
With this function, users can request information such as engine and cabin temperature, battery
voltage, and fuel level.
In Service Mode, transition to other additional modes is prohibited!
For this function to work, owner authorization must be enabled, sensors must be activated,
and vehicle speed information must be available.
When the Immobilizer Mode is enabled alongside the "Slave" mode, both authorization
conditions must be met to disarm the system.
To Next Page
Loading...
