Starline S96v2 - Setting Time and Date

Selecting a Sound Theme
In the sound profile menu, you can also set the tone of the remote key's sound signals by selecting
one of the sound themes. To select a sound theme, follow these steps:
1. Enter the sound profile menu by performing a second-level long press on button 3:
icon-long-3.png
Image not found or type unknown
icon-note-2.png
Image not found or type unknown
.
2. Briefly press buttons
icon-short-double-2-3.png
Image not found or type unknown
simultaneously. The screen will
display the name of the sound theme: BR-1 or BR-2.
3. Briefly press buttons
icon-short-double-2-3.png
Image not found or type unknown
simultaneously to select the next
sound theme.
You will automatically exit the menu after 10 seconds if no buttons on the remote key are pressed
Automatic Button Lock Function
When this function is activated, the remote key buttons are automatically locked after the
backlight turns off. The function is enabled and disabled by performing a second-level long press
on buttons 1 and 4:
icon-long-double-1-4.png
Image not found or type unknown
icon-note-2.png
Image not found or type unknown
.
Remote Key Locator Function
To locate the remote key, hold the service button for 5 seconds — the remote key will emit a sound
signal.
Setting Time and Date
To set the current time and date, follow these steps:
1. Enter the time and date settings menu by sequentially pressing button4:
icon-long-4.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-4.png
Image not found or type unknown
.
2. Use a short press of button
icon-short-2.png
Image not found or type unknown
to set the hours and a short press of
button
icon-short-3.png
Image not found or type unknown
to set the minutes.
image.png
Image not found or type unknown
image.png
Image not found or type unknown
1 — Hours;
2 — Minutes.
3. Briefly press button
icon-short-1.png
Image not found or type unknown
to proceed to set the current date.
By default, the BR-1 theme is set