Static Solutions CT-8900 Combo Tester Instructions 1/15/2015
43
Multiple Station Operation
When more than one station is entered into the Multiple Reader Configuration window, the software will enter the multiple station
display mode. There are two display panes. The upper pane shows the present status of each station, and the lower pane shows
the accumulated test log results.
Language Display
The “Scan Badge” window and the “Test results” window can be displayed in different languages. The correct language should be
displayed according to the Windows Regional language settings (Start, Settings, Control Panel, Regional and Language Options,
Regional Options Tab), if the language mode is set to “Auto”. This can be over ridden in the Settings, General Configuration,
Language list box. Click the up or down arrow to select one of the following settings:
• Auto
• English
• Spanish
• Portuguese
• Italian
• Chinese
• Polish
• Hungarian
Be sure to also click on the language shown in the box, so that it is displayed in blue, to select it. Then click OK.
To Next Page
Loading...
Need help?
General
