Steca coolcept - Page 8

Rating plate
1
7
2
3
4
5
6
8
⑨
①
Bar code for internal purposes
②
Protection class
③
Technical data of the DC input
④
Article number and product designation
⑤
Manufacturer's address
⑥
Symbol Protection class II and CE mark
⑦
Country of manufacture
⑧
Technical data AC output
⑨
Standard for grid monitoring
Notes
– For Australia only: Mask off the
Protection Class IIsymbol on the type plate, as described
on
Ä p. 35 .
– For the serial number, see
Ä p. 6 and Ä p. 7
– For the position of the rating plate, see
Ä 3.1, S. 14f.
EU Declaration of Conformity
The products described in this document comply with the applicable European directives.
Certificates for the products are provided at
www.stecasolar.com ⇒ PV GRID CONNECTED ⇒
Grid inverters
EN
747,431 | Z09 | 2015-09-30 8