4.4 Prepare DC connections
DANGER!
Risk of death by electrocution!
– Observe the warning notes in
Ä
4.1, p. 33 .
– Use the provided SUNCLIX plugs so that the specified protection class is maintained.
NOTICE!
Danger of damage to the inverter and the modules. Connect the opposing connectors for the
DC connections to the DC cable, observing the correct polarity.
Attach the connector plug counterparts to the DC cable according to the manufacturer's
instructions; see Appendix.
4.5
Prepare the data connection cable
If a data connection is required, use a standard RJ45 cable (patch cable) or construct an
alternative data connection cable (see
Ä
further information on page 30)
4.6 Connect inverter and switch on AC
DANGER!
Risk of death by electrocution! Observe the warning notes in
Ä
, p. 33 .
EN
747,431 | Z09 | 2015-09-30
39
To Next Page
Loading...
