149
Global Effects
Effects Reference
Phaser
The Phaser effect thickens and broadens the sound by means of phase modulation.
The Feedback parameter allows you to add resonances to sweep the sound.
Rate
Use this to specify the frequency of the phase modulation in Hertz.
Sync
Activate this to set the Rate value in fractions of beats.
Depth
This sets the intensity of the phase modulation.
Shift
This shifts the phase modulation upwards to higher frequencies of the spectrum.
Phase
This widens the sound image of the effect from mono to stereo.
Low Cut
Attenuates the low frequencies.
High Cut
Attenuate the high frequencies.
Mix
This sets the ratio between the dry and the wet signal.
Tremolo
This effect produces amplitude modulation, that is, cyclic modulation of the level of the
sound.
Rate
Use this to specify the frequency of the amplitude modulation in Hertz.
Sync
Activate this to set the Rate value in fractions of beats.
Depth
This sets the intensity of the amplitude modulation.
Phase
This widens the sound image of the effect from mono to stereo.
Output
Sets the output level of the Tremolo.
To Next Page
Loading...