Diamante User Guide
104
© 2012 Stenograph, L.L.C.
9. Double click the DiamanteWave update file. The Diamante/Wave Update dialog box displays.
10. Click Go!. The screen briefly displays a message indicating the updated software build is being sent
to the Diamante. The Customer and Serial Number screen displays.
11. Type your customer number and your Diamante serial number in the appropriate fields and click
Next. Your computer briefly displays the message, “Updating Options File...” The Diamante beeps
twice and then displays the message: Programming Flash.
If the customer number or serial number does not match or the update is incomplete, an error
message displays. Click OK and follow the instructions in the error message. If the problem persists,
contact Diamante Technical Support. See page 101.
12. When the update is complete, the Diamante reboots and displays the Opening menu. Your computer
displays the message: Successfully Updated the Diamante. Click OK to Exit.
13. Click OK and in the Diamante/Wave Update dialog box on your computer, click Quit. You can delete
the update file.
To Next Page
Loading...
