Diamante User Guide
58
© 2012 Stenograph, L.L.C.
Display Set Strokes Per Minute (SPM)
This option allows the average number of strokes per minute to display on the Title bar and Status
screen. The Title bar shows the approximate number of strokes per minute, SPM, while writing. The
Status screen shows strokes per minute data for the most recent job. While writing, the Status screen
shows strokes per minute data for the current job.
1. From the Opening menu, press Setup, More, Options.
2. Press the Up and Down buttons as necessary to highlight the Display Strokes per minute (SPM)
option.
3. Press the Change button to toggle the option between Yes and No. Yes is the default.
4. To display the Opening menu, press OK, More, Quit.
To Next Page
Loading...
