Stenograph Diamante - Time and Date

Diamante User Guide
92
© 2012 Stenograph, L.L.C.
Time and Date
The Time function allows you to change the time and date on your Diamante. It is important to maintain
date and time accuracy in the event you need to locate a file in memory, on the Data SD card or on the
Backup SD card.
1. From the Opening menu, press Setup, Time. The Time and Date screen displays.
2. Press the Next button to select the unit of time or date you want to change.
• Month
•Day
• Year
• Hour
• Minutes
•AM/PM
3. Do one of the following:
• To increase the unit of time or date, press +.
• To decrease the unit of time or date, press -.
4. Repeat the previous steps for each unit of time or date you want to change.
5. To apply your selection, press Accept.
6. To display the Opening menu, press Quit, More, Quit.