39
Chapter 3: Writing on the Diamante
© 2012 Stenograph, L.L.C.
A/An Resolution
A/An resolution automatically selects the correct word, “a” or “an” based on the word that follows. The
steno translates as “a” before consonants and as “an” before vowels and the numeral 8.
The steno, A, must be defined as "a" (no quotes) in your dictionary in order for the A/An Resolution
feature to work. If the dictionary entry is defined as a conflict, this feature does not work as described.
To turn A/An resolution Off or On:
1. From the Opening Menu, press Setup, Trans. Opt. The current status of the A/An option displays on
the screen.
2. Press the Up/Down buttons as necessary to highlight the A/An option.
3. Press the On/Off button to toggle the A/An option On or Off.
4. To display the Opening menu, press OK, More, Quit.
To Next Page
Loading...
