Stenograph Diamante - Prompt to End a Job Option

Diamante User Guide
78
© 2012 Stenograph, L.L.C.
Prompt to End a Job Option
The Diamante can optionally prompt you with a confirmation message each time you press the End
button to close a job. When the message displays, you can continue to close the job by selecting End
again. Pressing Cancel or continuing to write cancels the message and the job remains open.
To set the end job confirmation prompt option:
1. From the Opening menu, press Setup, More, Options.
2. Press the Up and Down buttons as necessary to highlight the Prompt to end job option.
3. Press the Change button to toggle the option between Yes and No. No is the default.
4. To display the Opening menu, press OK, More, Quit.