Stenograph Diamante - Auto-Conflict Resolution

43
Chapter 3: Writing on the Diamante
© 2012 Stenograph, L.L.C.
Auto-Conflict Resolution
Auto-Conflict Resolution, when turned On, automatically selects the first choice of the conflict. This
prevents the display of conflicts on the Diamante screen for easier readback. This option does not affect
the realtime output when writing realtime to a computer.
To turn Auto-Conflict On or Off:
1. From the Opening Menu, press Setup, Trans. Opt. The current status of the Auto-Conflict
Resolution option displays on the screen.
2. Press the Up and Down buttons as necessary to highlight the Auto-Conflict Resolution option.
3. Press the On/Off button to toggle the Auto-Conflict Resolution option On or Off.
4. To display the Opening menu, press OK, More, Quit.