Stenograph Diamante - Audio Playback

Diamante User Guide
42
© 2012 Stenograph, L.L.C.
Audio Playback
The Play feature becomes available when you use a Search feature while writing a job. Play allows you
to playback the audio portion of the file from the point of the highlighted text forward in the file. The
Diamante highlights the corresponding steno and text on the Tilting screen during the audio playback.
You can stop the playback at any time. A set of external speakers or headset is required for audio
playback.
To play audio while writing a job:
1. Using a Search feature, look for any of the following: Last Q, Last A, Last Mark, Steno or Untranslate.
See Search on page 81 for information about searching.
2. When you identify the position in the file from which you want to playback the audio, press the Play
button. The Diamante begins the playback and simultaneously highlights the corresponding text and
steno.
3. Use the Quieter and Louder buttons to adjust the playback volume. If applicable, you may also need
to adjust the volume control on your headset or speakers.
4. Press Stop when finished.