Stenograph Diamante - Page 57

57
Chapter 3: Writing on the Diamante
© 2012 Stenograph, L.L.C.
3. Select job dictionaries to use for translation and set the priority. Use the Up and Down buttons to
move the pointer (>>) to the desired job dictionary and press Select. The dictionary priority is set in
the order you select the dictionaries. To reorder the priority, press Clear to deselect all the
dictionaries so that you can reselect the dictionaries in the desired priority order.
When the Case CATalyst Power Define dictionary is loaded, the Diamante automatically selects it for
use when making a J-Define. The Power Define dictionary takes priority over all other dictionaries
when creating a J-Define. It does not display in the dictionary list.
4. Do one of the following:
•Press Accept to save the selections. The Dictionary menu displays.
•Press Quit to exit without making changes to the existing job dictionary priorities. The Dictionary
menu displays.
5. To display the Opening menu, press Quit.