Tech Support: www.steppir.com/support Tel: 425.891.6134 support@steppir.com
Page 15
ASSEMBLY KITS- BILL OF MATERIALS (OPTIONAL ITEMS)
6M PASSIVE ELEMENT KIT
QTY PART NUMBER DESCRIPTION
1 10-1019-31 6m Element mounting plate
2 60-0001 1” U-bolt
4 60-0030 1/4” Nylock Nut
2 60-6000-60 1/2” SS Hose Clamp
2 10-1601-03 2” Aluminum saddle half
2 60-0075 5/16” X 3-1/2” Hex head bolt
2 60-0046 5/16” Nylock nut
QTY PART NUMBER DESCRIPTION
2 10-1601-03 1 3/4” Aluminum saddle half
8 10-1510-01 Element truss clamp
2 60-0083 4” Stainless turnbuckle
2 60-0158 1/8” Thimble
4 60-0157 1/8” Wire clip
1 60-0110 1/4” x 1-1/4” Hex Bolt
1 60-0030 1/4” Nylock Nut
2 60-0065 5/16” x 3 1/2” Hex head bolt
2 60-0046 5/16” Nylock nut
2 60-0033 5/16” Flat washer
1 21-7001-01 75' 1/8” Dacron Rope (uncut)
16 60-0014 6-32 Nylock Nut
16 60-0014-01 6-32 x 7/8” Pan head machine screw
1 10-1028-01 Anti-seize packet
1 09-0001 Electrical Tape
1 60-0112 Set Screw
END TRUSS KIT
72-0018-01
(Quantities below are for one complete element truss kit—there are two truss kits included for a DB18 Yagi.)
PREAMBLE
To Next Page
Loading...
