Click LAN Basic Setting. The following screen will appear:
- IP address: Enter the IP address of your router, the factory preset is: 192.168.10.253.
- Sub network: address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
- Type of DHCP server, client, or disabled.
- If you change the IP address of the LAN must log of the router with the new IP address.
- If the new IP address on the LAN that you set are not on the same subnet, the IP addresses
set from the DHCP server change accordingly at the same time, while Virtual Server and
DMZ Host will not take effect until they have been reconfi gured.
To Next Page
Loading...
