88
1. Start the computer.
2. Press the WPS button on the Router for 2-3 seconds.
3. Press the WPS button on the wireless adapter for 2-3 seconds. Click Finish to
complete WPS confi guration. (Please check the instruction manual of your wireless
adapter).
4.
Icons for added connection to computer and other computers and devices that
are part of the network should display.
1. Connect the Router to an outlet. Connect your computer or laptop to the router via
RJ45 cable.
2. To verify that the computer is added, do the following:
Open Network by clicking Start > Control Panel; in the search box, type network, then,
under Network and Sharing center, click View network computers and devices. You
should see
icons for the computer you added and for the other computers and
devices that are part of the network.
Add wireless computers with WPS button
Add a computer via Ethernet cable
To Next Page
Loading...
