1-2
P129391-130 Operator/Maintenance Manual Safety Precautions
CAUTION – POSSIBLE EQUIPMENT DAMAGE:
Ensure docking base is properly aligned to allow correct entry of loading car into chamber before
permanently fastening base to floor.
Ensure loading car is completely unloaded before making height adjustment.
After setting all height adjustments, ensure all nuts are tight and transfer carriage is level.
Ensure door opening is clear of any obstruction before closing the door(s).
Immediately wipe up saline solution spills on loading car, to prevent damage to stainless steel.
Do not use cleaners containing chlorides on loading cars. Chloride-based cleaners will deteriorate the
car and carriage metal.
Never rub a wire brush or steel wool on any stainless-steel surface.
To Next Page
Loading...
