Steris Evolution Series - Loading Instructions

5-2
P129391-130 Operator/Maintenance Manual Operating Instructions
Loading Instructions
STEP 1: Open sterilizer door.
STEP 2: Verify loading car is properly aligned upon transfer
carriage.
NOTE: Figure also identifies key components.
STEP 3: Align front end of transfer carriage with dock at base of
sterilizer.
STEP 4: Roll carriage forward until latching rollers engage with
dock.
STEP 5: Press forward on carriage handle, transfer carriage
latches to dock as car begins pushing into chamber.
STEP 6: Carefully push car into chamber.
STEP 7: Once car is fully inserted, turn hand crank
counterclockwise to disengage car from carriage.
STEP 8: Pull carriage away from sterilizer chamber.
• Loading car remains in chamber.
STEP 9: Once transfer carriage is fully extracted from chamber, it
unlatches from dock.
• Move carriage away from sterilizer.
Figure 5-1. Loading Car and Transfer Carriage Features
Hand Crank
Transfer
Carriage
Loading Car
Transfer
Carriage
Docking
Interface
Verify Alignment of Transfer Carriage and Loading Car