6-1
Maintenance Operator/Maintenance Manual P129391-130
Cleaning
Clean Evolution™ Loading Car to maintain its appearance as follows:
• Remove all shelves, shelf support rods and side gates.
• Using a sponge, nylon bristle brush, or lint-free cloth, wash
loading car frame, shelves, side gates, and shelf supports with a
mild detergent solution at a concentration of one ounce per
gallon.
• Use Liqui-Jet™ 2 Instrument Detergent
1
.
• Use multipurpose cleaner rated for stainless steel or painted
steel (depending on equipment finish) for stubborn stains or soil
buildup. Use a plastic scraper to remove heavy deposits of
baked-on organic or melted plastic pieces. DO NOT use a metal
scraper.
• Rinse thoroughly with deionized, distilled, or reverse osmosis
water.
• Repeat above steps until all visible residue has been removed.
Clean Evolution™ Transfer Carriage to maintain its appearance as
follows:
• Using a lint-free cloth, wash transfer carriage with a mild
detergent solution at a concentration of one ounce per gallon.
• Use Liqui-Jet 2 Instrument Detergent
1
.
• Use a multipurpose cleaner rated for stainless steel or painted
steel (depending on equipment finish) for stubborn stains or soil
buildup. Use a plastic scraper to remove heavy deposits of
baked-on organic or melted plastic pieces. DO NOT use a metal
scraper.
• Rinse thoroughly with tap water. Dry with a lint-free cloth.
• Repeat above steps until all visible residue has been removed.
1.Recommended detergents and cleaners can be purchased from STERIS. Contact
your local STERIS representative for information.
MAINTENANCE
6
To Next Page
Loading...
