Need help?Do you have a question about the Steris Harmony LED Wall Control Unit and is the answer not in the manual?
General| Mounting | Wall-mounted |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Compatibility | Steris Harmony LED Surgical Lighting System |
| User Interface | Touchscreen with intuitive controls |
| Operating Temperature | 10° to 40°C (50° to 104°F) |
| Storage Temperature | -20° to 60°C (-4° to 140°F) |
| Relative Humidity | 30% to 75% non-condensing |
| Display | LCD touchscreen |
| Description | The Harmony LED Wall Control Unit is a component of the Harmony LED Surgical Lighting System, providing centralized control and monitoring of the surgical lights. |
| Control Functions | Brightness adjustment, color temperature control, standby mode |
Specifies optical characteristics like illuminance, irradiance, and color rendering for M5 and M7 lightheads.
Essential steps to verify correct installation before the first use of the equipment.
Confirms the control center and lightheads function correctly after installation.
Explains how to adjust the brightness level of the surgical lightheads using control center and surgeon controls.
Describes how to interpret fault indicators on the lighthead itself.
Explains fault messages and indicators displayed on the control center.
Instructions on how to position the lightheads for optimal surgical illumination.
Guides on adjusting the size and shape of the light pattern.
Provides step-by-step instructions for general cleaning and disinfection of the equipment.
To Next Page