5-12
10083002 Operator Manual Operating Instructions
5.8 Monitor Arms The HarmonyAIR Surgical Lighting System M Series can be
equipped with one or two monitor support arms.
Monitor arms can be included in the lighting system either as the
uppermost arm on the central spindle, or as the secondary spindle
arm.
Refer to Figure 5-10 and Figure 5-11. Flat panel monitor support
arms are capable of the following articulations: (1) rotate 240° at the
secondary spindle; (2) rotate 320° at the central spindle; (3) rotate
310° at the horizontal extension arm; (4) rotate 320° at the yoke
transition; (5) move up or down by pivoting at spring arm knuckle up
to 40° up, and 40° down. Flat panel yoke also allows (6) tilt15°
backward (up) and 90° forward (down).
• For additional information, refer to separate operating
instructions supplied with monitor(s). (Monitor instructions for
use are provided by monitor manufacturer.)
• Power supply and input signals to monitors can be routed
through the suspension wiring from an external video source
(wiring services, when required, are provided by a third-party
video integrator or through STERIS OR Integration. Contact
STERIS for further information).
Figure 5-9. Sterilizable Surgeon Control Handle
Surgeon’s Intensity
Control Buttons
Align Tab on Handle
Adaptor with Channel
in Mounting Ring
Lighthandle Adaptor
Lighthandle Adaptor
Sterilizable Surgeon Control Handle
To Next Page
Loading...
