Steris Harmony LED Wall Control Unit - Lighthead Runtime and Limit Values; Figure 5-23. System Menu 2 (Runtime and Limit Values)

5-30
10083002 Operator Manual Operating Instructions
5.16 Lighthead
Runtime and Limit
Values
Access system menu 2 by “System 2” button on the wall control.
System menu 2 displays the runtime for each lighthead in hours.
Runtime column displays the wall control units's stored value for the
corresponding lighthead's runtime, in hours. Lighthead runtime
hours are accumulated by the lighthead PC board whenever
lightheads are turned on. Accumulated lighthead runtime hours are
periodically transmitted to the wall control.
Figure 5-23. System Menu 2 (Runtime and Limit Values)
LIGHTHEAD 2
LIGHTHEAD 3
LIGHTHEAD 4
LIGHTHEAD 1
SYSTEM MENU 2
–
LAMP RUNTIME HOURS
RUNTIME
28523
00000
14000
17000