Release 00 - 11/2018
page 11
3. TECHNICAL DATA AND SPECIFICATIONS
3.7. Table of Tightening torques
Chapter Ref. Description of screw Tightening torques
5 Tank xing screw 8 - 12 Nm
5 - 6 Fixing nuts, starter assembly 6 - 10 Nm
6 Starter screw 8 - 12 Nm
7 Starter motor mounting screws 22 - 30 Nm
9 Fixing nuts carburettor and lter 6 - 10 Nm
10 Fixing plate screws 5 - 7 Nm
11 - 14 Fixing screw AUTO-CHOKE 5 - 7 Nm
12 - 15 Spark plug tightening torque 25 - 32 Nm
12 Fixing screw reel 8 - 12 Nm
12 Coil xing stud 8 - 12 Nm
12 Brake support screws 8 - 12 Nm
14 Mufer protection xing screws 8 - 12 Nm
14 Screws valve cover 8 - 12 Nm
15 Flywheel xing nut 55 - 65 Nm
15 Blow-by closure plate screws 5 - 7 Nm
16 Union screws under carter and sump 8 - 12 Nm
16 Counterweight governor xing screw 5 - 7 Nm
16 Fixing screws lower connecting rod cap 11 - 13 Nm
P.S. For the coupling tourque of all standard screws refer to the single table.
To Next Page
Loading...
