Stiga WBE170 - Page 51

Release 00 - 11/2018
Engine WBE 170
page 51
Workshop Manual
16. ENGINE BLOCK - Overhauling internal parts
20 - Fit the connecting rod (19), gudgeon pin (29)
and clamping rings (28) to the piston (21).
NOTE - The marking on the piston must be
directed towards the intake.
The connecting rod must be mounted with
themarking(35)facingupwards.
21 - Put the piston into the ring compression tool (36).
22 - Oil the inside of the piston liberally and insert
the piston, with the marking facing the exhaust.
29
28
21
28
19
35
36
36
<< BACK >>
INDEX