EasyManuals Logo

Stihl MS 271 Manual

Stihl MS 271
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
64 MS 271 C, MS 291 C
Installing unwound rewind spring
If the rewind spring has popped out,
refit it in the fan housing as follows:
Arrange the rewind spring (1) in
its original position.
: Fit the anchor loop in its
seat (arrow) in the fan housing.
: Fit the rewind spring (1)
clockwise in the housing, holding
the windings steady in the
process.
The procedure is otherwise the
same as that for installing a new
rewind spring.
5902RA221 TG
1
5902RA222 TG
1
Models with ErgoStart
As the spring seat is deeper on this
model, the rewind spring cannot be
fitted directly in the fan housing.
: Fit the anchor loop in its seat
(arrow) in the frame.
: Fit the rewind spring (1)
counterclockwise in the frame,
holding the windings steady in
the process.
: Check the washer (1) and
replace it if necessary.
The procedure is otherwise the
same as that for installing a new
rewind spring.
Secure the spring so that it
cannot pop out.
Install the rope rotor, b
8.5
Reassemble all other parts in the
reverse sequence.
5902RA608 TG
1
5902RA223 TG
1

Table of Contents

Other manuals for Stihl MS 271

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl MS 271 and is the answer not in the manual?

Stihl MS 271 Specifications

General IconGeneral
Motor type2-stroke motor
Chain gauge1.6 mm
Chain pitch3/8 \
Blade length400 mm
Automatic oilingYes
Oil tank capacity0.24 L
Fuel tank capacity0.5 L
Engine displacement55.5 cm³
Engine power3.8 hp
Power sourceGasoline
Weight and Dimensions IconWeight and Dimensions
Weight5600 g

Related product manuals