55
DEFRNLITESPTNOSVFIDAPLSLSKTR EN
0478 111 9940 A - EN
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
– Product modifications not approved by
STIHL.
– Use of fuel and lubricants not approved
by STIHL (lubricants, petrol and engine
oil, see engine manufacturer's
specifications).
– The use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality.
– Improper use of the product.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
Mowing blade for RM 545, RM 545 T,
RM545V, RM545VE, RM545VR:
6340 702 0100
Multi-blade for RM 545 VM:
6340 702 0120
Blade fastening screw:
9008 319 9075
Retaining washer:
0000 702 6600
17.1 Petrol lawn mowers (STIHL RM)
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
the machine
manually operated lawn mower with
engine (STIHL RM)
conforms to the following EC directives:
2011/65/EU, 2000/14/EC, 2014/30/EU,
2006/42/EC, 2006/66/EC (RM 545.0 VE)
The product has been developed in
conformity with the following standards:
EN ISO 5395-1, EN ISO 5395-2, EN
60335-1, EN 14982
(charger RM 545.0 VE: EN 60335-2-29,
EN 62233, EN 60335-1)
The versions of the standards valid on the
production date apply to development and
production of the products.
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Sven Zimmermann
STIHL Tirol GmbH
16. Standard spare parts
The fastening elements for the
mowing blade (e.g. blade fastening
screw) must be replaced when
replacing the blade, i.e. when
installing the blade. Spare parts are
available from a STIHL specialist
dealer.
17. EU - Declaration of
conformity
manufacturer's
brand:
STIHL
serial number: 6340
type: RM 545.0
RM 545.0 T
RM 545.0 V
RM 545.0 VE
RM 545.0 VM
RM 545.0 VR
To Next Page
Loading...
