0478 193 9905 C - EN
104
Fold engine cover (6) up to the stop.
Ensure that catch (7) engages correctly in
the frame.
Closing the engine cover
Push engine cover (6) forward slightly and
hold.
Release (lift) catch (7) and slowly lower
cover (6).
Screw in both screws (5) and tighten.
Tightening torque: 20 - 25 Nm
Danger of pinching!
Ensure that no body parts can be
pinched before closing.
Close the cover slowly and
carefully.
To Next Page
Loading...
