91
DEFRNLITESPT EN
0478 193 9905 C - EN
5 V-belt tensioner lever
6 V-belt pulley
7 Front mowing deck mounting
8 Rear mowing deck mounting
13.1 Removing the mowing deck
● Park the machine on level and solid
ground.
● Stop the engine. (Ö 12.3)
● Remove the ignition key.
● Engage the parking brake. (Ö 8.10)
● Remove the grass catcher box.
(Ö 12.10)
● Remove the discharge chute. (Ö 14.5)
Removing the rear V-belt cover
● Select the lowest cutting level.
Step 1:
Remove closure screw (1) by turning
through 90° anti-clockwise.
Step 2:
Pull the rear V-belt cover (2) forwards and
remove.
Detaching the V-belt
● Select cutting level 3.
Press V-belt tensioner lever (5) in the
direction of the arrow (forwards) using a
suitable length of pipe and hold.
Remove V-belt (2) from V-belt pulley (6).
● After removing the V-belt, slowly
release the V-belt tensioner lever.
Risk of injury!
Prior to all operations on the
mowing deck, carefully read and
observe the section "For your
safety". (Ö 4.)
Avoid damage to the machine!
When the mowing deck is removed,
the ride-on mower must not be
operated with the discharge chute
installed.
Remove the discharge chute so
that it cannot catch on objects
(molehills, roots, etc.) and become
damaged. (Ö 14.5)
Danger of burns:
Allow the machine, particularly the
exhaust system, to cool down
completely before removing the
rear V-belt cover.
To Next Page
Loading...
