22
English / USA
TS 400
Short names
The short name is a combination of
letters and numerals with up to four
digits:
: The letters indicate the main area of
use for the cutting wheel.
: The numerals indicate the
performance class of the STIHL
diamond cutting wheel.
Radial and axial run-out
A correctly mounted spindle bearing on
the cut-off machine is essential for a
long service life and efficient operation
of the diamond cutting wheel.
Using a cutting wheel on a cut-off
machine with defective spindle bearing
can lead to axial and radial run-out.
Excessive radial run-out (A) causes
individual diamond segments to be
overloaded and to overheat. This can in
turn lead to stress cracking in the wheel
core or to softening of individual
segments.
Axial run-out or wobble (B) results in
higher thermal stress and wider cuts.
Letter Main area of use
A Asphalt
B Concrete
S Stone (rock)
To Next Page
Loading...
