– The message is specific to trucks with the
fork lifting block option or the DLC 1 - 2 op-
tion. The message warns that the maximum
height set for the forks has been reached
("height exceeded warning"). The message
"OK" appears on the display in the red rec-
tangle (E).
– To delete the message and be able to lift
the forks and the load higher, keep the first
button on the right on the keypad (D) press-
ed for around three seconds.
– The rectangle (E) on the display turns yel-
low and the word "OK" disappears. The
warning triangle that warns the operator to
pay special attention when moving loads
appears in its place.
– The message is specific to trucks with the
DLC 3 option or lifting block option. The
message warns that the first maximum
height level set for the forks has been
reached ("first block height exceeded warn-
ing"). The message "OK" will appear on the
display.
– To delete the message and be able to lift
the forks and the load higher, keep the first
button on the right on the keypad (D) press-
ed for around three seconds.
OM2295
Altezza superata
Avvertimento
Ok
ED
OM2294
Altezza superata
Avvertimento
F
Overview
3
Instruments and controls
3545758043484 EN - 11/2021 - 08
To Next Page
Loading...
